Plate heat exchanger is a new type of high efficiency heat exchanger


The immersed coil heat exchanger bends the metal tube into various shapes that are compatible with the container and is immersed in the liquid in the container.

Advantages: simple structure, can withstand high pressure, can be made of corrosion-resistant materials.

Disadvantages: the degree of liquid turbulence in the container is low, and the heat transfer coefficient outside the tube is small. To increase the heat transfer coefficient, a stirrer can be installed in the container.

Plate heat exchangers are ideal for heat exchange between liquid-liquid and liquid-vapor. It is a new type of high efficiency heat exchanger which is assembled by stacking a number of rows of metal sheets with a certain corrugated shape.

The structural principle of the plate heat exchanger: the detachable plate heat exchanger is made up of a plurality of stamped corrugated sheets at regular intervals, surrounded by gaskets, and pressed by a frame and a compression screw, and the plates and gaskets are four. The corner holes form a distribution tube and a collecting tube of the fluid, and at the same time, the cold and hot fluids are reasonably separated to flow in the flow paths on both sides of each of the sheets, and heat exchange is performed through the sheets.

A heat exchanger consisting of a baffle, a compensation ring and a heat release nozzle. When the fluid is heated at a high temperature, the compensation coil is to eliminate the thermal stress because the temperature difference between the shell and the tube bundle is too large, causing different thermal expansion rates.

Déjanos llamarte

Por favor complete el formulario. El departamento correspondiente se pondrá en contacto con usted lo antes posible. Gracias

El tiempo de retroalimentación del cliente es08:00-18:00